New Rigging Lines

I changed the standing rigging on my boat and with the mast down I thought I should replace my halyard lines also. I when on line to see what was available and found a nice article on how to pick new lies.

New England Ropes VPC was listed as a good halyard line. It has Vectran / Polyester blend core which gives low stretch and it has a nice braided polyester cover and it gives great protection from sun damage and best of all it is reasonably priced. It is chafe resistant and gives you a good grip.

For sheet lines and spinnaker lines Sta-set was suggested. It is all polyester core and cover, has a little more stretch but it is very free running and slick for going through blocks. For more performance (and more money) Endura or V-100  was suggested.

I was not sure what I would fine when I when to buy the line, but I had a better idea on what was available. 8-) It was neat to ask for specific line and see if they had it. 8-) I was able to get the line and at a good price, but I do have to say that the color of the line was also important. Different color lines make it a lot easier when to know what line is which. 

When I rigged the little schooner I built I rigged it with all the same color of line (I bought a full reel of line). The line works well but I have to always put the same line on the same cleat each time to keep them straight. I learned a lot building that boat. 8-)

Schooner Lines

Schooner Lines...they need to be different colors!

When we built our schooner I had no idea it would require as many yards of rope or line as it did to get her rigged. I made a guess estimations, added 20% and choked. Then when I got to the Chandlery I choked when I found that the cost of line had gone up about 20% since I had last bought line.

My original Idea was to color code each major line, so it would be easy to know what line was what. When I did a quick calculation I found that it was not cost effective to do that. The price per foot of the line was higher than if I bought a full spool of line. The spool had more line than I thought I would need, but I figured I would use it. I did use it, plus more when it was all said and done.

In hind sight I should have bought 2 spools, each of a different color. The original idea of different color lines was a good one. Rigging the boat with all the same line made it more difficult to sail. We quickly learned that we had to tie the same line to the same cleat each time. The cleat became the key to knowing what line you had. We also learned that we needed to coil and store each line in the same place once under way for the same reason. If the lines got mixed and messed getting the sails down became a big problem.

The main has two halyards, a topping lift, and a sheet line, and it is the same for the fore sail. The jib has a halyard, two sheet lines, and a line that goes to the front of the boom on the bottom of the jib to the tip of the bow. 

In addition to those lines you have a painter, port and starboard dock lines and an anchor line. We leave the spring lines at the dock. Oh, there are lines for the bumpers and a few extra lines that are for unexpected events. 8-)

Each line needs the ends of the line whipped. That is a day’s work in itself but it is time well spent. It also looks sharp and prevents the line from unraveling. It also makes threading the lines through blocks much easier. Splicing a loop in the end of a line also can make life easier. It is well worth learning how to do basic line splicing. I have not mastered splicing a loop on the end of a line yet. I think 1 out of 6 looks nice and you have to be lenient on what you think looks nice. 8-)  A whipped end works better for me. 

For a 28’ boat there are 22 cleats, and each have a use. At times I wish there were a few more cleats; you always need one where there is none.

I have to replace some lines on another boat this year. I will get a different color line for it and see if I can mix and match lines between the boats. It is nice to set things up so I do not have to think as hard when line handling. I learned the hard way that spending the extra money on different color lines would have been a great saving in frustration.